The right thermowood color and how to maintain it

Thermowood lubrication and maintenance tips for longer life

Introduction

Thermowood, even with all its extraordinary properties, acts like a living thing; It breathes, reacts with light and moisture, and if not properly cared for, it will slowly lose its color and resistance. Lubrication and maintenance of thermowood is not only beautiful, but also directly affects its life span, durability and even thermal resistance.

At Azar Wood, the experience of several years of working with real projects from villas in the north to commercial spaces in Tehran has brought us to a definite conclusion: The secret of the long life of Thermowood lies in proper and intelligent maintenance. Let's carefully and expertly examine how to lubricate Thermowood so that it always shines like the first day.

Why is lubrication important for thermowood?

Thermowood loses a large part of its natural moisture in its thermal process. On the one hand, this feature causes high resistance to fungus and mold, but on the other hand, it makes the surface of the wood more sensitive to UV rays and color change.

Oiling is a type of natural re-nutrition for wood; That is, the microscopic pores fill the surface with vegetable oils so that the wood can withstand moisture and sunlight. Without this protective layer, thermowood will gradually turn gray, lose its luster, and in some cases, the same surface will develop surface cracks.

Azarwood products are primed once in the factory before delivery so that the initial protection is complete during installation. But just as a car needs periodic service, wood must be oiled every year to maintain its originality.

Choosing the right oil for Thermowood

The market is full of low-quality oils and compounds that only make the wood look shiny, but have no effect on its resistance. The right oil should be based on natural plant materials (such as flax or sunflower seeds) and contain no artificial paraffin.

In Azarwood, European oils with famous brands such as Oli Natura and Osmo are used, which contain UV filters and anti-fungal substances. These oils penetrate the grain of the wood, rather than just sitting on its surface.

Golden tip: matte oils are great for warm and sunny spaces; Because they absorb heat less. Glossy oils, however, are more suitable for shady and humid spaces, so that they can repel water faster.

The correct way to lubricate thermowood

Oiling Thermowood, contrary to its simple appearance, is a precise multi-step process. Next, let's review the standard Azarwood method:

1. Cleaning the surface: First, dust, grease and pollution particles must be removed. This can be done with a soft brush and a little water.

2. Thorough drying: After washing, the surface should be dried in the open air for at least 24 hours so that no moisture remains.

3. Application of oil with a pen or a soft cloth: Unlike paint, oil should be gently pressed into the texture of the wood, not just spread over it.

4. Removing excess oil after 20 minutes: Excess oil should be removed, because if left on the surface, it will cause stains and stickiness.

5. Repeating the second layer after 12 hours: For more durability, the second application causes complete absorption and uniformity of the color.

Azar Wood products are usually covered with two layers of specialized oil and at the end, they are polished with a special cloth so that the wood surface becomes silky and anti-stain.

Azerwood recommends checking the wood every year (preferably before summer or fall) and oiling if needed. Signs such as discoloration, matting of the surface or roughness of the wood indicate that it is time to renew.

In humid areas such as Gilan and Mazandaran, it may be necessary to repeat every 8 months, while in dry areas such as Isfahan or Kerman, once a year is sufficient.

A common mistake is that users oil the wood in wet or very hot conditions; While the ideal temperature for applying oil is between 15 and 25 degrees and the air humidity should be less than 70%. Otherwise, the oil will not be properly absorbed and the surface will remain cracked.

One of the most important factors in the longevity of Thermowood is its behavior right after installation. Thermo should not be washed with a direct stream of water (such as a hose or car wash). Also, non-specialized paint or coating should not be applied on it, because it closes the pores of the wood.

In Azar Wood, after installation, the maintenance booklet for the project is delivered to the employer, which includes all the necessary recommendations for each season; From how to wash to relubrication schedule.

One of the important differences between treated wood and abandoned wood is the luster of the color and the regularity of the grain. The right oil preserves the color of the wood, makes the grain lines more prominent and the surface of the wood feels more natural.

For this reason, the projects implemented by Azarwood 4-5 years ago are still as beautiful as the first day. High-quality oil practically acts like a protective skin that does not allow environmental conditions or light to damage the internal structure of the wood.

Lighter colors are generally known to reflect more light and provide better heat protection, but fade faster against UV. Therefore, pigmented oils should be used in light woods.

Darker woods have better light resistance, but they are prone to expansion in hot weather; For this reason, in Azar Wood, oils with an anti-expansion base (Thermo Balance) are used so that the dark wood also maintains its shape.

Oiling and maintaining thermowood is not a decorative task, but a part of sustainable architecture. Just as a metal structure cannot last without anti-rust, natural wood will not have a useful life without protective oil.

By combining technical know-how, original European oils and continuous supervision, Azar Wood guarantees that every wooden project, whether it is a villa in the north or a commercial facade in Tehran, will remain healthy for years with the same initial shine.

Finally, the secret to the longevity of wood is simple: care, love and precision. And these three words are the same philosophy that flows in the heart of the Azarwood brand.